Split System Air Conditioner Installation Hamilton South NSW

Supply and Install a Split System Air Conditioner

The Project

The client had been running a Mitsubishi air conditioner for over 17 years. With all the advances in AC technology, they decided it was time to upgrade their air conditioner to a more efficient system that was complete with air purification and quieter.

We visited the client’s location after they contacted us with the view to replacing their aircon. Upon our inspection, we determined that a 6.0kW Panasonic RZ Series split system air conditioner would be perfect for the area of the home they wanted to heat and cool.

A 6.0kW air conditioner will heat or cool a large open-plan living area efficiently.

Project Details

Client – Residential
Property Type – Residential Home
Location – Hamilton South, NSW
Task -Decommission existing 7.1kW Mitsubishi air con and supply and install a new Panasonic air conditioner
System Install – Panasonic CS-RZ60XKRW Split System

Decommissioning the split system air conditioner

Their existing indoor split system a/c unit was attached to the living room wall. The outdoor unit was positioned outside along the side wall of the home. Once both units were removed we took out all the electrical cabling. Decommissioning an air conditioner does not mean we take it to the tip. We return it to our workshop and strip it down for spare parts in case we have a client or potential customer who needs their air conditioner repaired and we have that part.

Installing the new split system air conditioner

After we disconnected and uninstalled the existing air conditioner’s inside and exterior units. The wall where the new indoor unit was to be installed was cleaned. Using the adjustable feet, the outside unit was levelled after being placed on a concrete surface. To ensure that no wire from the old unit remained, we examined the electrical power box. We installed an outdoor kill switch.

Controlling the air conditioner

The remote controller built-in network adaptor can be used within 8 metres of the aircon unit. The controller runs on AAA batteries and comes with a holder that can be attached to the wall.